Ayuda acceder a Acces Point

If your network does not have a DHCP server, the Access Point usesa factory assigned IP address(169.254.2.2). You can use that IP address to configure the Access Point, or you can assign a new IP address to the Access Point.
To verify that the Access Point is using the default IP addressassigned at the factory:
1 Connect a computer directly to the Access Point using the supplied standard Category 5 UTP Ethernet cable.
2 Enter the Access Point’s default IP address (169.254.2.2) into the computer’s web browser. If the Configuration Management System starts, the Access Point is using the factory assigned IP address. You can configure the Access Point with the following login information:
Login name: admin
Password: password
If the Configuration Management System does not start, the Access Point is on a different subnet than the computer. Install and start the 3Com Wireless Infrastructure Device Manager to discover the Access Point’s IP address.

Hacer clic para expandir...

cicklow dijo:

en el manual de usuario dice que tienes que entrar a 169.254.2.2

Hacer clic para expandir...

Luis12 dijo:

eso esto cansado de usar esa ip pero no carga nada, eso me tiene loco

Hacer clic para expandir...

cicklow dijo:

te dice que lo conectes directo a la PC con el cable de red para entrar... sino que tambien puedes usar el CD para configurarlo

Hacer clic para expandir...